Brick Dinos - Wall Hangings
Components:
4x wall-hanging exhibits.
3x ‘Did you know?’s:
Dino/Bus
Dino/Teeth
Dino/Weight
Insects
2x ‘About…’ tension fabrics (Metal frames stored in black bazooka. Fabric, frame corners and allan key stored in a thin black box)
‘About Brick Dinos’
‘About Warren Elsmore’
Set-up:
Hang the ‘Did you Know?’s’ and ‘About…’s on the wall in the agreed locations.
Not mandatory, but often the ‘Did you Know?’s are placed near the Interactive Play Features, whilst the ‘Insects’ are placed near the wheeled-plinths.
None of these items have in-built lighting.
Hang the ‘About…’s in agreed locations.
Fix the 4 pieces of the aluminium frame together with the corner pieces.
be careful not to strip the grub screw threads as you do os. You do not need to remove the grub screws entirely to fit them inside the frame.
be aware that it takes a little finessing to properly square-up the frame and the corners.
Fix the frame to the wall with screws, through the existing holes in the frame.
ensure the wall being used it ok to be screwed into.
Insert the tension fabric into the frame using the silicone gasket.
do not try to finish this process at one corner, you are likely to be unable to stretch the fabric properly that way.
Start at one corner and get a 2/3rds of each resultant side in, then add the other 3 corners, then finish the remaining sides.
Smooth it out as necessary.
Store all transit bags/bazooka cases in one of the transit cases being used for storage.
Venue are responsible for other lighting.
